Dustbane Victory Sprayer Nozzle Wrench

Dustbane Victory Sprayer Nozzle Wrench. Used to install and remove Nozzles.

How to Use:
1. Remove the battery from the unit. Next fill the tank by first removing it from the unit by rotating the tank locking collar and pulling the tank release ring. The tank can now be removed.
Note: you must hold on to the tank when you pull the tank release ring or the tank will fall to the floor.
2. Insert the nozzle wrench into the front end of the unit.
3. Rotate wrench until the tabs on the nozzle and the slots on the wrench are lined up.
4. When the wrench slots and the nozzle tabs are lined up, the wrench will be completely inserted into the front end, rotate the wrench clockwise to adjust to a diff erent size spray. The largest particle tip has a line cut through it, rotate clockwise until you hear a click to get the medium particle and rotate clockwise again until it clicks again to get the smallest particle.
5. Remove the wrench when complete.