Dustbane Glacier High Solids Floor Finish, 5L

Dustbane Glacier High Solids Floor Finish, 5L. A true 25% high solids floor finish. By applying one to 2 coats, you will get the results of 3 to 4 coats of other floor finishes. This floor finish will save physical energy, labour and will lower maintenance costs.

Polymer technology: A.P.E. free.
High solids: Fewer applications required to build up base coat.
High gloss: Superior appearance. Wet look.
Durable: Resists scuffs, scratches, heel marks, etc.
Slip resistant: Produces a safe, slip-free surface.
Easy to remove: Readily removed using conventional strippers.
Rapid Recoating: Able to apply many coats in a small time frame.

Should be used to protect and enhance the appearance of high profile area floors. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended before the application of the floor finish. Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 45 minutes or more. Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and re-coat worn traffic areas as required. Spray buff as needed.

This product is comparable to Betco Multi-Purpose Floor Finish, 6600400.