Account Holder? Login for Wholesale Pricing
 Call 1-800-661-9891   |   View Hours
My Cart (0)
 My Cart (0)
Home  >  New Items  >  MN7505A2001

Honeywell Damper Actuator, 44 in-lb, Non-Spring Return, Floating Modulating

$35471
Special Order

 

SKU: MN7505A2001

Honeywell Logo

 


Honeywell MN7505A2001 Damper Actuator, 44 lb-in, Non Spring Return, Modulating, 2-10 Vdc, 24 Vac. This 44lb-in Non-Spring Return Direct Coupled Actuator (DCA) is a control actuator that provides floating or proportioning control for valves and dampers. The proportioning actuators accept a current or voltage signal from a controller to position the damper or valve at any chosen point between fully open and fully closed.

Stock shown on hand can change at anytime without notice or may already be spoken for. Please inquire by phone to confirm precise amounts available at that time.
Alberta
Edmonton (DC): 0
Edmonton (South): 0
Calgary: 0
British Columbia
Richmond: 0
Surrey: 0
Manitoba
Winnipeg: 0
Saskatchewan
Saskatoon: 0
Ontario
Hamilton: 0
London: 0
Mississauga: 0
Scarborough: 0
Windsor: 0
These are estimated number of days using averages of past orders for inventory arriving to each branch location and are not guaranteed. If you need to verify manufacturer stock please email customercare@amresupply.com or call us at 1-800-661-9891.
Amre Branch # of Days
Calgary: 45
Edmonton Downtown: 38
Edmonton South: 19
Mississauga: 30
Richmond: 29
Saskatoon: 20
Scarborough: 40
Winnipeg: 33


Product Specifications

  Additional Torque Ratings (lb-in.): Maximum Stall-- 70 lb-in.
  Additional Torque Ratings (Nm): Maximum Stall-- 8 Nm
  Ambient Temperature Range (C): -18 C to +50 C
  Ambient Temperature Range (F): 20 F to 125 F
  Control Signal: 2-10 Vdc; 4-20 mA
  Dimensions (in): 5.55 in high x 3.39 in wide x 3.0 in deep
  Dimensions (mm): 141 mm high x 86 mm wide x 76 mm deep
  Electrical Connections (in): Screw terminals
  Environmental, Electrical or Ingress Protection Rating: NEMA 1
  External Auxiliary Switches Available: Yes, 201052B
  Fail Safe Mode: Non-Spring Return
  Frequency: 50 Hz; 60 Hz
  Input Impedance: 45K ohm (2-10 Vdc signal), 536 ohm (4-20 mA signal)
  Manual Operation: Declutch mechanism
  Maximum Noise Rating: Driving (dB(A) @ 1m)-- 45
  Mounting Type: Direct Coupled
  Operating Humidity Range (%RH): 5 to 95% RH, non-condensing
  Power Consumption (W): Driving-- 5.4 VA
  Rotation to Open: By switch
  Shaft Adapter Type: Aluminum Hub, two set screws
  Shaft Dimensions (in): 3/8 to 1/2 in. square or round
  Shaft Dimensions (mm): 10 to 13 mm square/round
  Stroke (in): 90 degrees
  Supply Voltage: 24 Vac ±20%
  Timing, Nominal: Driving @ 60 Hz-- 90 sec
  Torque Rating (lb-in): 35 lb-in.
  Torque Rating (Nm): 4 Nm
  UL Classification: UL873, Plenum Rated

Customer Reviews


  Add a Customer Review

ML7161A2008