Frost Safety Grab Bar, 16" x 24", Stainless

Frost’s 1003-SP16 x 24R stainless steel grab bars offer a brushed and peened finish. These grab bars are stocked in various lengths and have a 1-1/4” diameter. Typically, these units are used in schools/universities, nursing homes, restaurants, malls, office buildings, condominiums, hospitals, recreation centres, and residential properties. The durable construction and high-quality stainless steel make this unit a popular choice. The Frost SP grab bar series comply with handicap codes requiring 1-1/4″ bar diameter and wall clearance of 1-1/2″. Barrier-free access specifications may vary depending on the jurisdiction.

Features
• Brushed stainless steel
• Peened grip
• Easy to install snap-on flanges with concealed mounting
• 90 degree bend provides a horizontal and vertical bar to hold

Materials
Snap flange is 12 gauge stainless steel with a full 360-degree bead weld to the 18 gauge stainless tubing. 1-1/4″ dia. stainless steel, peened finish on bar.

Strength and Installation Warning
Frost grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408kg) if properly installed. Other grab bar configurations can support loads in excess of 250 pounds (113kg) if properly installed, complying with accessible design for structural strength. All grab bars must be installed by qualified tradespersons. Installers must consult and comply with local building codes. Mounting hardware and other systems are to be determined by the contractor and installer pending specific structure, design, and conditions. All installations must be fully inspected and approved by property owners and maintenance personnel prior to the bar being put into use. Failure to comply with proper installation procedures will void the warranty and may result in malfunctioning or injury.

Product Dimensions
1003-SP 16” X 24” R – 16”L x 24”D x 3.25”H (40.6cm L x 61.0cm D x 8.3cm H)