Axiom Pressure Pal Mini System Feeder

Axiom MF200 'Pressure Pal' Mini System Feeder. The ‘PRESSURE PAL’ is ideal for feeding and pressurizing closed hydronic systems that do not require cold static fill pressures higher than 170 kPa (25 psig). It is compatible with both water and glycol/water solutions. Perfect for small boiler/chiller systems, snow/ice melt circuits, outside air heating/cooling glycol coils, solar heating systems.

Features:
25 liter (6.6 US gallon) tank for storage and mixing
UL listed Power supply plugs into any standard 115 VAC outlet
Diaphragm pump can run dry without damage
No direct connection to potable water supply eliminates need for backflow prevention
Make-up fluid stored in the feeder tank can be pre-treated
Diverter valve allows easy purging of air on initial start-up, and manual agitation of solution
Prevents major floods – in the event of system rupture, only the contents of the tank will be pumped into the system
Provides leak detection – dropping fluid level provides immediate notice that the system has developed a leak
Fluid drained for service can easily be put back into the system
Fluid level switch shuts the pump off if the storage tank level gets too low