Amaircare Roomaid Portable HEPA Air Purifier, Slate, Up to 300sq/ft

Amaircare Roomaid Portable HEPA Filtration System- Roomaid is ideal for bedrooms, small offices, and other areas where space may be limited. Slate Color.

Also Available in White see Alternative Products below.

Air Cleaned through the filter each Hour ACH per Sq. ft. (50 sq. ft. 4.8 ACH), (75 sq. ft. 3.2 ACH), (100 sq. ft. 2.4 ACH), (250 sq. ft. 1 ACH), 300 sq. ft. 0.5 ACH.

Two-Stage Filtration
Stage 1: Pre-Filter - Removes large dust particles
Stage 2: HEPA Filter - 99.97% efficient @ 0.3 microns. Removes dust, pollen, bacteria, animal dander, attached viruses, cigarette smoke, radon daughters, and more.
Low Electrical Costs- It would take 13-1/2 Roomaids to use the same amount of electricity as one regular 60 Watt light bulb.
Up To 5 Year Filter Life- HEPA filter lasts up to 5 years and needs no maintenance.
Reusable Pre-Filter- Washable foam pre-filter can be used over and over.
5 Year Limited Warranty

Includes:
120 Volt AC to 12 Volt DC adapter with 7 foot cord
Spare washable pre-filter

Common Applications: Homes & Bedrooms, Offices & Workplaces, Vehicles, Travelling & Hotels

Dimensions: 8-1/2" Diameter, 7-1/2" High
Weight: 4.5 lbs
Air Flow: 20 & 40 CFM
Power Consumption: 5 Watts
Classification: Portable HEPA Sealed Air Cleaning Device; UL & CSA Approved
Materials: 24 Gauge Cold Rolled Steel
Finish: Powder Coated, Baked Enamel
Colour: Slate
Intake (Upper Section): Two-Stage Filter Assembly
Outflow (Lower Section): 330°
Motor/Fan: Designed For Continuous Operation; Run Tested For 35,000 Hours; Service 12 Volts DC
Control: 3 Position, 2-Speed Switch
Filter Life: Pre-Filter Washable (12 Months), HEPA Filter 2-5 Years

Prefilter Replacement
1. Turn the unit off and unplug it.
2. Remove the used prefilter and carefully discard it in a plastic bag.
3. Line up the seam in the prefilter with the receptacle at the back of the unit. Pull the new prefilter over the unit so it snugly covers the screen.
4. Plug the unit in and turn it on.

HEPA Cartridge Replacement
1. Turn the unit off and unplug it.
2. Turn the unit upside down. With one hand holding the HEPA cartridge, pull the motor/fan housing away. Discard the cartridge in a plastic bag.
3. Sit the motor/fan housing right side up and seat the gasket in the groove.
4. Place the HEPA cartridge on the motor/fan housing and align the plugs in the cartridge with the holes in the housing. Once the holes are aligned press firmly on the top of the cartridge to secure it to the housing.
5. Plug the unit in and turn it on.