Alltemp Triple D Coil Cleaner w/ Trigger Sprayer, 0.9L

Triple-D Universal Coil Cleaner, Ready-To-Use, No Mixing Required! For Professional Use Only, 0.9 Lires/32oz.
Degreaser Detergent, Deodorizer, Non-Foaming Cleaner, Metal Safe, Fin Friendly, Pleasant Fragrance.

Triple-D™ is a Universal Coil Cleaner suitable for use on condenser and evaporator coils. Metal safe and does not attack aluminum or copper coil components, extending equipment life and diminishing potential for refrigerant leaks. Safe for rooftop units. Triple-D™is a safer, more versatile product than conventional acid or non-acid coil cleaners. One product does it all — truly a Universal Coil Cleaner.

Triple-D™ is a triple active synergistic detergent cleaner formulated to remove a broad range of soils with minimal time and effort. Triple-D™ cleans condensers, evaporators and filters in HVAC-R systems and eliminates the need for steam cleaning, scrubbing or soaking. Its unique system of surfactants, penetrants, and emulsifiers eliminates the need for expensive toxic solvent based degreasers. Triple-D™ neutralizes obnoxious odors often found in air handling and filter systems.

Directions:
Wear eye and skin protection when using this product.
Condensers: Shut down the system. If the unit is hot, cool the condenser with a water stream before applying Triple-D™. Apply as a
saturating spray, and allow 5-10 minutes reaction time. Flush thoroughly with water, backwashing the condenser if possible. Return the system to service.
Evaporators: Shut unit off and saturate the coil with Triple-D™. Allow 5-10 minutes reaction time. Resume normal operation. Condensate from unit operation will flush coil contamination. No rinsing is required under normal conditions.
Electronic filters, Permanent filters, Fan blades, Motors, Grills: Spray Triple-D™ on the surface to be cleaned. Depending on the type and amount of soil, allow Triple-D™ to penetrate for 1-5 minutes. Wipe or rinse with clean water. Reapply as necessary for heavy soil accumulations. Do not allow Triple-D™ solutions to dry on the surface. Wipe up drips and overspray and rinse the area with a sponge or cloth dampened with water.