Account Holder? Login for Wholesale Pricing
 Call 1-800-661-9891   |   View Hours
Home  >  Tools  >  Refrigeration Tools  >  Refrigeration Vacuum Pumps  >  4383-34

Nu-Calgon Vacuum Pump Oil

  • Photo 1 of 4383-34 : Nu-Calgon Vacuum Pump Oil

1 of 1
Click Main Image to Enlarge
Grids Shown are 1" x 1"

$1474
Special Order

Click here for estimated arrival time to your local branch

 

SKU: 4383-34

Nu-Calgon Logo

 


Key Features

  • A multi-viscosity oil as specified by its viscosity index of 100. Multi-viscosity oils provide for peak performance at wide temperature and pressures
  • Lubricates and seals at operating temperatures developed by pump
  • Very low vapor pressure. A critical characteristic of a vacuum pump oil
  • “Pop-up” caps on pints and quarts for complete ease of pouring into pump’s oil port

Nu-Calgon Vacuum Pump Oil.
Nu-Calgon Vacuum Pump Oil is a quality blend of high-grade lubricants, providing for oil that performs at the deepest vacuum. It lubricates to minimize wear and provide surface protection, and its high viscosity index assures adequate lubrication at high and low pressures. In addition, its broad package line guarantees the right package size for all levels of service activity, from the service professional handling only an occasional evacuation to the one conducting several every day.

Directions:
This product must be used in accordance to the following directions by HVACR professionals only.

Change the oil in the vacuum pump after every use of the pump.

During pump operation, moisture as well as other contaminants like acids, vapors, etc. are easily absorbed into the vacuum pump oil. If the vacuum pump oil is not changed after absorbing such contaminants, it will become dirty and keep the pump from performing at design capacity (i.e., it will not reach its ultimate vacuum). Moreover, this will result in longer pump down time as well as excessive wear on integral parts of the pump.

Drain used oil from pump. If it appears exceptionally dirty or sludged, power flush the pump according to the pump manufacturer’s recommendations; power flushing helps to cleanse the pump of the old contaminated oil residuals. After power flushing, refill pump with fresh, new vacuum pump oil. View oil through sightglass and test the unit’s ultimate vacuum. If oil appears dirty or if vacuum is unsatisfactory, change oil again.

See back side of bulletin for oil changing capacities for some of the more frequently used vacuum pumps.
Stock shown on hand can change at anytime without notice or may already be spoken for. Please inquire by phone to confirm precise amounts available at that time.
Alberta
Edmonton (DC): 0
Edmonton (South): 0
Calgary: 0
British Columbia
Richmond: 0
Surrey: 0
Manitoba
Winnipeg: 0
Saskatchewan
Saskatoon: 0
Ontario
Hamilton: 0
London: 0
Mississauga: 0
Scarborough: 0
Windsor: 0
These are estimated number of days using averages of past orders for inventory arriving to each branch location and are not guaranteed. If you need to verify manufacturer stock please email customercare@amresupply.com or call us at 1-800-661-9891.
Amre Branch # of Days
Calgary: 30
Edmonton Downtown: 21
Edmonton South: 21
Hamilton: 13
London: 5
Mississauga: 18
Richmond: 24
Saskatoon: 15
Scarborough: 23
Surrey: 27
Windsor: 8
Winnipeg: 18

Product Downloads
  More Information
  SDS Form (ENG)

Customer Reviews


  Add a Customer Review