Rainfresh In-Line Water Filter, For Refrigerators, Ice Makers, Water Coolers, Etc, IM200

Rainfresh Genuine OEM IM200 In-Line Refrigerator Ice & Water Filter.

This water filter cartridge is an economical choice in the reduction of chlorine taste and odour, without removing fluoride. It improves the taste and odour of your water and ice. The Rainfresh In-Line Ice and Water Filtration System is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 and 53.

This Rainfresh Refrigerator Water Filter is an external inline filter that installs on 1/4" water line. This is the line that feeds water to the fridge. The IM100 features 1/4" Female NPT connections.

Specifications:
Filter Life: 6 months or 1000 gallons (whichever comes first)
Flow Rate: 0.5 gallons per minute
Operating Pressure: 100 psi
Operating Temperature: 39-100 °F

How To Replace The Rainfresh IM200 Water Filter:
1. Push in on blue quick-connect fittings with your fingers while pulling out on the tubing. The tubing will be released.
2. Connect inlet end of filter to tubing from water source. The flow of water must be in same direction as the directional arrow on
the new filter. Push scratch-free tubing into quick connect fitting until it bottoms. The inlet tubing is now connected and sealed. Do
not connect outlet tube yet.
3. Hold filter over bucket and flush for 10 minutes before beginning service.
4. Shut off water supply again and now connect outlet end of the filter using the same procedure as step 2.
5. Turn back on water supply.

For best performance and to ensure clean and safe drinking water, it is highly recommended to change your filter every 6 months.

Also known as Fridge Water Filter