Dustbane Foundation Floor Sealer, 4L

Dustbane Foundation Floor Sealer, 4L. Achieves uncommon levels of durability and permanency for total sealer protection. Gives good levelling, appearance and gloss with minimum effort.

Reduced environmental impact: ECOLOGO Certified UL 2777 - Hard Floor Care Products.
Chemical Resistant: Resists spills and stains, detergent and ice melt. Unaffected by washing and damp mopping.
Colourless Film: Will not yellow with age.
Dries Quickly: Faster re-coat, less “down time”.
Safe to Use: It is solvent free and non-flammable. It contains no A.P.E. or zinc.

Designed to give total sealer protection to resilient (except unsealed wood) and non-resilient (except magnesite) floors. Apply using a clean mop or sprayer, allowing 30-60 minutes between applications. Two or three coats are recommended. Before sealing non-resilient floors, it is recommended that a small test patch be applied and checked for adhesion after 24 hours. New non-resilient floors must be completely cured and dried before application. Surface etching is not required. Floors must be stripped, cleaned and allowed to dry thoroughly.

Coverage per 4 L is 150 m2 (1600 ft2) to 240 m2 (2500 ft2) depending upon porosity of the floor.

This product is comparable to Betco Sure Cure Acrylic Urethane Sealer/Finish, 6090400 and 6090500.