Dustbane Orbit All-Systems Floor Finish, 4L

Dustbane Orbit All-Systems Floor Finish, 4L. Developed for use in high profile areas where the ultimate “wet look” gloss and durability are desired. A high solid content builds the required film thickness with fewer coats, producing a safe, slip-free surface.

Reduced environmental impact: ECOLOGO Certified UL 2777 - Hard Floor Care Products.
Odour: Low odour.
Fast Drying: Will dry in as few as 30 minutes.
High Solids: Excellent durability; resists scuff, scratches, heel marks, etc.
Easy to use: Excellent levelling and gloss; non streaking; no mop drag during application. Readily removed using conventional strippers. Able to apply many coats in a small time frame. Using polymer technology. A.P.E. and zinc free.

Should be used to protect and enhance the appearance of high profile area floors such as showrooms, foyers, reception areas, lobbies and other areas in shopping malls, airports, hospitals, nursing homes, universities, theatres and commercial buildings. May be applied to all resilient and non-resilient floors except for unsealed wood and cork.

Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.
Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.
Maintenance: Dust and/or wet mop daily. Spray buff as needed. For best results, after damp mopping with a neutral floor detergent, apply Orbit diluted at 1:4, let dry for 30 minutes then burnish the floor. Burnishing daily is highly recommended but not imperative.

Coverage per 4 L is 150 m2 (1600 ft2) to 240 m2 (2500 ft2) depending upon porosity of the floor.

This product is comparable to Betco Hybrid Multi-Purpose Floor Finish, 6600400.