Dustbane Elite All-Systems Floor Finish, 20L

Dustbane Elite All-Systems Floor Finish, 20L. Developed for use in high profile areas where the ultimate wet look gloss and durability are desired.

Polymer technology: A.P.E. free.
Odour free.
High solids: Excellent durability; resists scuff, scratches, heel marks, etc.
Deeper gloss: Superior appearance. Wet look.
Slip resistant: Produces a safe, slip-free surface.
Easy to apply: Excellent levelling and gloss; non-streaking; no mop drag.
Easy to remove: Readily removed using conventional strippers.
Rapid Recoating: Able to apply many coats in a small time frame.

Should be used to protect and enhance the appearance of high profile area floors such as showrooms, foyers, reception areas, lobbies and other areas in shopping malls, airports, hospitals, nursing homes, universities, theatres and commercial buildings. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish. Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more. Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Burnishing daily is highly recommended but not imperative.