King Electric K Series Baseboard Heater Built-In Tamperproof Thermostat Kit, SPST

BKT1BW-TP King Electric Tamperproof Thermostat Kit Built-In Single Pole Single Throw (SPST) White No Off Position
Use With K Series Baseboard Heaters
The Single Pole Thermostats work like a typical Thermostat No Off Position
Features
RANGE: 45° to 80°F ( 7°C - 27°C )
Maximum Amps: 25 Amps
Power Source: 125 VAC, 250 VAC & 277 VAC
Snap Action Switching: Instant, positive response.
No: arcing. No: burning of contacts to shorten switch life. No: TV snow, no radio static.
Enclosed for protection against dirt and corrosion.
Bi-Metal Sensing Element: This sensitive element dependably registers the temperature change. Fully protected.
Vented Frame: Top and bottom to maintain normal temperature in outlet box. No obstruction of air across bi-metal sensor.
Factory Calibrated: Engineered for accurate dependable performance. Field adjustment not required.
Enclosed Terminals: To prevent contact with grounded faces.
Rating: 22 Amps continuous at 125, 240 Volts AC. Non-inductive. 18 Amps continuous at 277 Volts AC. Non-inductive.
Average Differential: Approximately 5°F at 50% of rated load.
Cycle Rate: Approximately 2 - 4 per hour at 50% of rated load.
Limit Stops (single pole only): Maximum temperature can be set by insertion of a pin.King Electric Thermostat Kit Built-In Single Pole Single Throw (SPST) White
Use With K Series Baseboard Heaters
Features
RANGE: 45° to 80°F ( 7°C - 27°C )
Maximum Amps: 25 Amps
Power Source: 125 VAC, 250 VAC & 277 VAC
Snap Action Switching: Instant, positive response.
No: arcing. No: burning of contacts to shorten switch life. No: TV snow, no radio static.
Enclosed for protection against dirt and corrosion.
Bi-Metal Sensing Element: This sensitive element dependably registers the temperature change. Fully protected.
Vented Frame: Top and bottom to maintain normal temperature in outlet box. No obstruction of air across bi-metal sensor.
Factory Calibrated: Engineered for accurate dependable performance. Field adjustment not required.
Enclosed Terminals: To prevent contact with grounded faces.
Rating: 22 Amps continuous at 125, 240 Volts AC. Non-inductive. 18 Amps continuous at 277 Volts AC. Non-inductive.
Average Differential: Approximately 5°F at 50% of rated load.
Cycle Rate: Approximately 2 - 4 per hour at 50% of rated load.
Limit Stops (single pole only): Maximum temperature can be set by insertion of a pin.