Delta TECK Sensor Exposed Urinal Flush Valve, 3/4" Top Spud, Adjustable 1.9 LPF/0.50 GPF

Delta TECK® Sensor Exposed Urinal Flush Valve. Hard wire flush valve for 3/4" top spud flushing urinal with H2Optics® sensor on valve - maximum 13" height (c/l of inlet to top of urinal).

Features:
Quiet action, TECK® exposed HARD WIRE operated diaphragm flush valve
Right or left-hand supply installation
Vandal Resistant copper tube conduit
Chloramine resistant diaphragm, forged brass diaphragm retainer
Renewable seat, polished chrome plated finish, vacuum breaker
(110 to 24 VAC Transformer not included. See Series Spec for additional part numbers.)
For UrinalS with 3/4" top inlet
ADA compliant, automatic operation hard wire powered infrared sensor
Polished chrome plated vandal resistant metal cover with top mounted sensor operated H2Optics® electronics
Scratch resistant replaceable lens window
Infrared sensor range adjustment of 457mm-914mm (18" - 36"), factory set at 28” (±2")
Hard wire adaptor 24 VAC to 6 VDC converter (supplied)
Optional 24 hour automatic flush factory set to ON
Set-up sensor range adjustment indicator lights
24 VAC input, 8 second arming delay
Electronic operated non-hold-open metal manual override button with 5 second lockout
(110 to 24 VAC transformer not included. See Series Spec Sheet for additional part numbers)
1" FIP/ 3/4" Copper sweat inlet adaptor, angle check stop with protecting cap
Adjustable 121mm (4-3/4") plus or minus 11mm (7/16") inlet/valve outlet centers
Cover tube, stainless steel wall flange, spud flange, spud nut, and 330mm (13") outlet tube.
Optional backup battery available
External water conserving adjustment: 1.9L (0.50 Gal.) Factory Set Flush at 60 psi - FIELD ADJUSTABLE from 0.47 to 3.78 Litre Flush (1/8 to 1.0 GAL.)

ADA Compliant to meet Handicapped Accessibility Standard ICC/ ANSI A117.1 of less than 5 lbs operating force

Also known as: Flushometer