Robertshaw 700-502 750 Millivolt Dual Gas Valve, 1/2" x 1/2", 1/2" Side Outlet

Robertshaw 700-502 Millivolt Gas valve
1/2" Inlet x 1/2" Outlet Straight Through or Side with plugs
Includes 2 1/2" x 3/8" Reducer Bushing.
Can be converted to L.P Gas with a 1751-013 Regulator.
* Works with Coaxial thermopileor 2 lead thermopile.
The 700 millivolt gas valves are wall thermostat actuated combination gas valves. These controls combine a manual gas cock, automatic pilot safety valve and a millivolt operator. The automatic pilot safety is separate from the gas cock and provides gas shutoff in case of pilot outage. Regulated and non-regulated models are available. Standard features include: pilot outlet, pilot gas filter and pilot adjusting key. VALVES CAN BE MOUNTED IN ANY POSITION EXCEPT UPSIDE DOWN. Consult ordering chart for individual control specifications.
Most appliances manufactured in the USA and Canada are manufactured to meet the standards set forth by the American National Standards Institute (ANSI). A revision in the standards "mis-wiring requirements for gas valves" was effective January 1, 1996. The reason for this standard was so that you as a service technician could disconnect the gas valve wires and reconnect them without making a mistake. Therefore all Robertshaw® millivolt gas valves now meet the new standard.
Specifications
Electrical rating 250 MV to 750 MV, operating range
Pressure regulator (optional by model) factory set @ 3.5" W.C.
Pilot outlet 1-1/4" tubing
Gas cock dial marking off-pilot-on
Terminal type 1/4" spade
Ambient temperature –40° to 175°F
Maximum inlet pressure 14" W.C. (1/2 PSI)