Account Holder? Login for Wholesale Pricing
 Call 1-800-661-9891   |   View Hours

Emerson White-Rodgers Intelli-Vent Combination Gas/Ignition/Thermostat for Power Vented Hot Water Tanks

  • Photo 1 of 37E73A-921 : Emerson White-Rodgers Intelli-Vent Combination Gas/Ignition/Thermostat for Power Vented Hot Water Tanks
  • Photo 2 of 37E73A-921 : Emerson White-Rodgers Intelli-Vent Combination Gas/Ignition/Thermostat for Power Vented Hot Water Tanks
  • Photo 3 of 37E73A-921 : Emerson White-Rodgers Intelli-Vent Combination Gas/Ignition/Thermostat for Power Vented Hot Water Tanks
  • Photo 4 of 37E73A-921 : Emerson White-Rodgers Intelli-Vent Combination Gas/Ignition/Thermostat for Power Vented Hot Water Tanks

1 of
Click Main Image to Enlarge
Grids Shown are 1" x 1"

  Click Here to View Part Videos
$44377
In-Stock for Same Day Shipping

If ordered before 4pm
Click here to check branch on hand inventory

 

SKU: 37E73A-921

Emerson Logo

 


Emerson White-Rodgers Intelli-Vent control is a combination gas valve, ignition control, and thermostat for use on Power Vented water heaters. The microcomputer in the control supervises the ignition sequence and timings for the water heater, and provides diagnostic codes in case of system malfunction. The control provides direct burner ignition using the White-Rodgers’ Silicon Nitride ignitor. The control uses the INTELLI-IGNITION™technology to greatly extend the ignitor’s life. Adjustable Regulator Controls: The gas regulator on this control requires no field service. The regulator is factory adjustable for the proper burner gas pressure.

Features:
INTELLI-VENT combines gas, ignition and thermostat into one control
Right angle with 1/2” N.P.T. inlet and 1/2” inverted flare outlet
70° to 160° range
Regulation range 20,000 to 150,000 BTU's
Natural gas only
Stock shown on hand can change at anytime without notice or may already be spoken for. Please inquire by phone to confirm precise amounts available at that time.
Alberta
Edmonton (DC): 2
Edmonton (South): 0
Calgary: 1
British Columbia
Richmond: 0
Surrey: 0
Manitoba
Winnipeg: 0
Saskatchewan
Saskatoon: 0
Ontario
Hamilton: 0
London: 0
Mississauga: 0
Scarborough: 5
Windsor: 0
These are estimated number of days using averages of past orders for inventory arriving to each branch location and are not guaranteed. If you need to verify manufacturer stock please email customercare@amresupply.com or call us at 1-800-661-9891.
Amre Branch # of Days
Calgary: 17
Edmonton Downtown: 19
Edmonton South: 16
Hamilton: 16
London: 14
Mississauga: 16
Richmond: 19
Saskatoon: 16
Scarborough: 13
Surrey: 16
Windsor: 13
Winnipeg: 16


Product Specifications

  Amerage: Inducer Motor 3.0 FLA, 4.0 LRA, Ignitor 2.0
  Length: 1.72” Shank
  Maximum Inlet Pressure: 1/2 PSI
  Operating Voltage: 120 Vac, 60 HZ
  Range of Regulation (BTU/hr.): 30,000 - 150,000 BTU/Hr.
  Regulator Setting: 3.5” W.C. Nat. Gas
  Temperature Range: 70° to 160°F

Product Downloads
  Sales Brochure
  Installation Instructions
  Sell Sheet

Customer Reviews


  Add a Customer Review