Account Holder? Login for Wholesale Pricing
 Call 1-800-661-9891   |   View Hours

Honeywell Damper Actuator Spring Return, Fast-Acting, Two-Position, 30 in-lb (3.4 Nm), 120 VAC, 2 Aux. Switches, for Fire and Smoke Dampers

  • Photo 1 of MS4104F1210 : Honeywell Damper Actuator Spring Return, Fast-Acting, Two-Position, 30 in-lb (3.4 Nm), 120 VAC, 2 Aux. Switches, for Fire and Smoke Dampers

1 of 1
Click Main Image to Enlarge
Grids Shown are 1" x 1"

$63832
Special Order

Click here for estimated arrival time to your local branch

 

SKU: MS4104F1210

Honeywell Logo

 


Honeywell Damper Actuator, Spring Return , Fast-Acting , Two-Position, 30 lb-in (3.4 Nm), 120 Vac, 2 Aux. Switches, for Fire and Smoke Dampers. These Honeywell's Fast-Acting, Two-Position Actuators are line volt (120V), 30 lb-in., spring return direct coupled actuators (DCA) for Fire and Smoke dampers (on/off control). The actuator accepts an on/off signal from a single-pole, single-throw (SPST) controller. Reversible mounting allows actuator to be used for either clockwise (cw) or counterclockwise (ccw) spring rotation.

Features:
30 lb-in. (3.4 N•m) minimum driving torque at 350 F (176 C)
Reversible mounting facilitates use in either clockwise (cw) or counterclockwise (ccw) spring rotation
Integral spring return ensures level of return torque
Fifteen-second spring return timing
No special cycling required during long-term holding
No audible noise during holding
Patent pending design eliminates need for limit switches to reduce power consumption
Ninety-five degree angle of rotation
Actuator holds rated torque at reduced power level
Die-cast aluminum housing
Housing design allows flush mounting to damper
Designed to operate reliably in smoke control systems requiring Underwriter’s Laboratories Inc. UL555S ratings up to 350 F.
Includes Two integral 3/8 in. clip-in flexible conduit connections
Stock shown on hand can change at anytime without notice or may already be spoken for. Please inquire by phone to confirm precise amounts available at that time.
Alberta
Edmonton (DC): 0
Edmonton (South): 0
Calgary: 0
British Columbia
Richmond: 0
Surrey: 0
Manitoba
Winnipeg: 0
Saskatchewan
Saskatoon: 0
Ontario
Hamilton: 0
London: 0
Mississauga: 0
Scarborough: 0
Windsor: 0
These are estimated number of days using averages of past orders for inventory arriving to each branch location and are not guaranteed. If you need to verify manufacturer stock please email customercare@amresupply.com or call us at 1-800-661-9891.
Amre Branch # of Days
Calgary: 45
Edmonton Downtown: 38
Edmonton South: 19
Mississauga: 30
Richmond: 29
Saskatoon: 20
Scarborough: 40
Winnipeg: 33


Product Specifications

  Additional Torque Ratings (lb-in.): Maximum Stall-- 150 lb-in.; Minimum Driving at 350 F-- 30 lb-in.
  Additional Torque Ratings (Nm): Maximum Stall-- 17 Nm; Minimum Driving at 175 C-- 3.4 Nm
  Ambient Temperature Range (C): -18 C to +55 C
  Ambient Temperature Range (F): 0 F to +130 F
  Control Signal: Two position; Single Pull, Single Throw
  C-Tick Approved: N314
  Dimensions (in): 8.9 in high x 5.13 in wide x 3.32 in deep
  Dimensions (mm): 227 mm high x 129 mm wide x 84 mm deep
  Electrical Connections (in): 32 in
  Electrical Connections (mm): 0.8 m
  Environmental, Electrical or Ingress Protection Rating: NEMA 1, IP40
  Fail Safe Mode: Spring Return
  Frequency: 60 Hz
  Internal Auxiliary Switch: 2
  Maximum Noise Rating: Driving (dB(A) @ 1m)-- 80; Holding (dB(A) @ 1m)-- 20 (no audible noise)
  Mounting Type: Direct Coupled
  Operating Humidity Range (%RH): 5 to 95% RH, non-condensing
  Power Consumption (W): Driving-- 0.18A, 18W, Holding-- 0.11A, 9W
  Shaft Adapter Type: Aluminum Hub, two set screws
  Shaft Dimensions (in): 1/2 in. round
  Shaft Dimensions (mm): 13 mm round
  Spring Return Direction: By orientation
  Spring Return Timing: 15 sec
  Spring Return Torque/Force (lb-in., lbf): 30 lb-in
  Spring Return Torque/Force (Nm, N): 3.4 Nm
  Stroke (in): 95 ±3 degrees
  Supply Voltage: 120 Vac ±10%
  Switch Ratings: 125 Vac/24 Vdc, 3A res
  Timing, Nominal: Driving @ 60 Hz-- 15 sec
  Torque Rating (lb-in): 30 lb-in
  Torque Rating (Nm): 3.4 Nm
  UL Classification: UL873, Plenum Rated

Product Downloads
  Installation Instructions
  Product Specifications

Customer Reviews


  Add a Customer Review