Dustbane Endurance High Durability Floor Finish, 5L

Known for its maximum durability and minimal maintenance, it features exceptional gloss, with improved wear and ultimate scuff resistance.

Polymer technology- A.P.E. free.
Detergent resistant- Fortified with a tough acrylic/urethane polymer blend.
Durable- Resists scuffs, scratches, heel marks, etc.
Low maintenance- Reduces labour costs.
Slip resistant- Produces a safe, slip-free surface.
Ease of application- Apply and maintain using most of the same procedures and equipment as a standard floor finish.
Easy to remove- Readily removed using conventional strippers.
Dries clear- No yellowing.
Multi-use- May be used with ultra high speed burnish, dry-bright and spray-buff systems, and on all resilient and non-resilient floors except unsealed wood.

Use in areas where there is high traffic which wears the finish, such as grocery stores, convenience stores, schools, lobbies, etc.

Floor must be clean, dry and stripped of any old finish. Rinse thoroughly with potable water and allow to dry. For maximum gloss, seal the floor with two (2) coats of sealer. Using a clean mop and bucket, apply three (3) coats of Endurance, allowing 30 minutes drying time between coats. Low Maintenance Program: Daily – Remove surface dirt and dust with a treated dust mop. This will improve appearance and reduce wear of the finish. Dry Bright – Damp mop as needed with a neutral floor detergent. Spray Buff – Clean the floor with a neutral floor detergent. Spray buff using a spray buff maintainer. UHS Burnishing – Clean the floor with a neutral detergent. Apply an ultra high speed floor maintainer with a clean mop. Let dry 30 minutes and burnish the floor.

This product is comparable to Betco Hard as Nails Floor Finish, 6590400, 6590500, 6593900, and 6595500.