Spirax Sarco FT-15 Float & Thermostatic Steam Trap, 3/4" NPT

Spirax Sarco 50926 FT-15psi 3/4" Steam Trap Float & Thermostatic Steam Trap
Spirax Sarco Float & Thermostatic Steam Traps are ideally suited for most HVAC and process applications. The
spherical stainless steel float automatically adjusts the position of the main valve so that condensate is discharged
continuously at the same rate as it enters the trap. Air and other non-condensible gases which are present at start up
or which enter the trap during operation are discharged through the integral balanced pressure thermostatic air vent
(some high pressure F & T traps have a bimetal air vent). The traps will operate against any back-pressure lower than
the inlet pressure. (The differential pressure—inlet pressure minus outlet pressure—determines the trap’s capacity).
All Spirax Sarco F & T traps will tolerate at least 450°F of temperature. The superheat tolerance of some models is
higher; refer to the appropriate Technical Information Sheet or call Spirax Sarco for further information.

Body Material: Cast Iron
Connections: 3/4" NPT
Piping Configuration: Parallel
Maximum Operation Pressure 15 psig