BRK 120V Hardwire Ionization Smoke & Carbon Monoxide Alarm

BRK Hardwire Ionization Smoke & Carbon Monoxide Alarm.

Combination Smoke and CO in one unit
• Combination smoke and CO alarm eliminates the need for two electrical boxes and features a permanently installed CO sensor and a dual ionization smoke sensor.
“Intelligent Sensing Technology”
• Microprocessor controlled to reduce nuisance alarms.
Latching Alarm Indication
• When interconnected in a series, the unit that triggered the alarm rapidly flashes its red LED indicator. After the alarm condition subsides, the initiating unit will store in memory or “latch” the information and begin to flash the red LED indicator once every 5 seconds.
Single Button Test/Silence
• Eliminates confusion. Depending on what mode the alarm is in, pushing the button will test, silence, or re-test the alarm when in silence and clear the latching feature.
“Perfect Mount” system
• Features a gasketless base and a mounting bracket that keeps the alarm secure over a wide rotation range to allow for true alignment. This will allow fine-tuning on the positioning to compensate for out of aligned wall studs.
Interconnectable—up to 18 devices, of which 12 can be smoke alarms
• Can be interconnected with up to 12 smoke alarms and the remaining six be combination units and / or RM4 relays.
“Quick-Connect” wiring harness
• Provides quick and easy connection to AC power

For BRK Hardwire Smoke Alarm, please see #9120A.

Also referred to as a Smoke Detector.