Spartan Wireless, Modulating Actuator Non Spring Return 24VAC

Spartan ME8200 Non Spring Return FLP Modulating Wireless RF433MHz Actuator.
The ME8200 wireless actuator utilizes a brushless, reversible synchronous A/C motor with constant torque and constant speed for accurate positioning over the full span of the valve travel with a unique, patented, non spring return movement (having five
robust moving parts) and has a life expectancy in excess of five hundred thousand cycles.

with all Spartan valve bodies. 2 way and 3 way zone control valve bodies with different type of connections, female x female threads in 1/2”, 3/4” and 1” sizes, single male union in 1/2” and 3/4” sizes and direct solder in 1/2” and 3/4” sizes from V240, V241, V243, V245, V246-12F, V243-12I, V320, V321, V323, V325, V420 series of zone valve

General Actuator Specifications
• Supply voltage: 24Vac, 60/50Hz, +/- 10%, 45mA, 1Va
• Control signal: Wireless RF433.92MHz (USA/Europe Standard) from Spartan TE8200/TE8300 room thermostat.
• Designed for unlicensed operation under FCC part 15.
• Ambient Temperature: 40ºF-120ºF (5ºC-50ºC) non condensing
• Cover: White ABS
• Output Force: 48Lbs (214N)
• Travel: 0.177” (4.5mm)
• Diagnostic LED’s: Red LED power status is on Green LED signal is received
• Enclosure: IP51
• Mounting: M30 x 1.5
• Approval: Meets CE and ROHS requirements, low voltage class II, 24Vac device as per UL & CSA
• Address Setting: The nine dip switches under the actuators cover are to select the address that has to match the address setting on the thermostat, with the exact physical ‘up and down’ positions. The actuator will ignore the message which is sent by the transmitter with a different address setting. Possibility of 512 address combinations. The last dip switch, no 10, is factory set in down position (direct acting) for heating - for cooling set dip switch to up position (reverse acting).
IMPORTANT - To validate a new address setting, the unit must be repowered.