Baso Y75 Flame Sensor For Intermittent Pilot Ignition
Although AMRE Supply works hard to provide the most accurate estimated delivery times, due to the COVID-19 pandemic, unexpected delivery delays from our vendor partners may not be reflected in the timelines displayed on the AMRE Supply website. As these additional timelines are beyond our control, AMRE Supply will not be accepting any cancellations on special order or out of stock items once the order has been placed, as many of our vendor partners have implemented no cancellation policies. Thank you for your understanding during this challenging time.
Baso Y75BA-1C Flame sensor.
The Y75 Series Sensing Probe for use with Intermittent Pilot Ignition (IPI) systems. For this application, the sensor is used as a remote sensor or in conjunction with a pilot burner assembly. If flame is sensed, the ignition control allows the main gas valve to remain open until the appliance thermostat is satisfied.
Compact Design- Permits installation in a variety of DSI, HSI, and IPI applications
Sensors Cut to Length and Configured- Maximizes performance
0.114 in. (2.9 mm) Diameter Rods Available- Allows for use with high temperature applications
Detachable Lead Wires- Allows individual wires to be replaced instead of the entire assembly
The Y75 is a Kanthal D or Hoskins 815 rod in a Steatite ceramic insulator mounted to a plated cold rolled steel bracket. Standard rod diameter is 0.114 in. (2.9 mm) .Standard sensor leads are available in lengths from 6 to 48 in. (152 to 1,220 mm), in 6 in. (152 mm) increments with a maximum temperature rating of 302°F (150°C).
The minimum distance between bends is 0.25 in. (6.35 mm). The minimum distance from the ceramic insulator to the first bend is 0.25 in. (6.35 mm). The maximum bend angle is 90 degrees, and the minimum bend radius is 0.063 in. (1.60 mm). The maximum number of bends per rod is two.
Stock shown on hand can change at anytime without notice or may already be spoken for. Please inquire by phone to confirm precise amounts available at that time.