NU-COAT Floor Sealer "An extremely durable, water based sealer/undercoater which prevents moisture and dirt penetration." FEATURES AND BENEFITS protective - improves the durability of floor finish top coats resistant - resists detergent, spills and stains, calcium chloride colourless film - will not yellow with age easy to apply - gives good levelling, appearance and gloss with minimum effort dries quickly - faster recoat, less "down time" easy to remove - when needed, it can be removed using conventional stripping methods WHERE TO USE Designed to give total undercoater/sealer protection to resilient and non-resilient floors. HOW TO USE Before sealing/finishing non-resilient floors, it is recommended that a small test patch of NU-COAT be applied and checked for adhesion after 24 hours. New non-resilient floors must be completely cured and dried before application. Surface etching is not required. Floors must be stripped, cleaned and allowed to dry thoroughly. Apply using a clean mop or sprayer, allowing 30-60 minutes between applications. Two or three coats are recommended.