ACCOLADE Sealer/Finish "A versatile sealer/finish which has been formulated to protect both resilient and non-resilient floors" FEATURES AND BENEFITS excellent floor finish properties - no need for a coat of finish, saves costs and labour chemical resistant - resists spills and stains detergent resistant - unaffected by washing and damp mopping calcium chloride resistant - compatible with "ice melter" residues colourless film - will not yellow with age dries quickly - faster re-coat, saves time and labour easy to apply - gives good levelling, appearance and gloss with minimum effort safe to use - no solvents, non-flammable WHERE TO USE May be applied to all resilient and non-resilient floors such as vinyl, vinyl composite, rubber, linoleum, terrazzo, quarry tile, slate, unglazed ceramic, brick, mexican tile and concrete. HOW TO USE Before sealing/finishing non-resilient floors, it is recommended that a small test patch be applied and checked for adhesion after 24 hours. New non-resilient floors must be completely cured and dry before application. Surface etching is not required. Floors must be stripped, cleaned and allowed to dry thoroughly. Apply using a clean mop or sprayer, allowing 30-60 minutes between applications. Two or three coats are recommended.