ELITE All-Systems Floor Finish “Developed for use in high profile areas where the ultimate “Wet Look” gloss and durability are desired.” Features and Benefits Polymer technology – A.P.E. free. Odour – Odour free. High solids – Excellent durability; resists scuff, scratches, heel marks, etc. Deeper gloss – Superior appearance. Wet look. Slip resistant – Produces a safe, slip-free surface. Easy to apply – Excellent levelling and gloss; non-streaking; no mop drag. Easy to remove – Readily removed using conventional strippers. Rapid Recoating – Able to apply many coats in a small time frame. Where to Use Should be used to protect and enhance the appearance of high profile area floors such as showrooms, foyers, reception areas, lobbies and other areas in shopping malls, airports, hospitals, nursing homes, universities, theatres and commercial buildings. May be applied to all resilient and non-resilient floors except for unsealed wood and cork. How to Use PREPARATION: Before your initial application, the floor must be stripped of any old finish. Rinse thoroughly with potable water, allow to dry then seal floor. APPLICATION: Using a clean mop and bucket, apply 1-3 coats of ELITE (depending on the porosity of the floor) allowing 30 minutes drying time between coats. MAINTENANCE: Dust and/or wet mop daily. Spray buff as needed. For best results, after damp mopping with a neutral floor detergent, apply a restorer or ELITE diluted at 1:4, let dry for 30 minutes then burnish the floor. Burnishing daily is highly recommended but not imperative.