GARD Floor Sealer "GARD achieves uncommon levels of durability and permanency for total sealer protection." FEATURES AND BENEFITS chemical resistant - resists spills and stains detergent resistant - will not wear down with damp mopping calcium chloride resistant - compatible with "ice-melter" residues colourless film - will not yellow with age dries quickly - faster recoat, less "down time" easy to apply - gives good levelling, appearance and gloss with minimum effort safe to use - no solvents, non-flammable WHERE TO USE Designed to give total sealer protection to resilient (except unsealed wood) and non-resilient (except magnesite) floors. HOW TO USE Before sealing non-resilient floors, it is recommended that a small test patch be applied and checked for adhesion after 24 hours. New non-resilient floors must be completely cured and dried before application. Surface etching is not required. Floor must be stripped, cleaned and allowed to dry thoroughly. Apply using a clean mop or sprayer, allowing 30-60 minutes between applications. Two or three coats are recommended.