Amaircare 1100 Portable HEPA Filtration System, Silvervein

Amaircare 1100 Portable HEPA Filtration System

Three-Stage Filtration
Stage 1: Pre-Filter - Removes dust and odours.
Stage 2: HEPA Filter - 99.97% efficient @ 0.3 microns. Removes dust, pollen, bacteria, animal dander, attached viruses, cigarette smoke, radon daughters, and more.
Stage 3: VOC Filter - Removes hazardous VOCs that may off-gas from things made with chemicals such as cleaners, paints, carpets, and furniture.
Easy-To-Change Filters- Snap-shut design makes changing filters fast and easy.
Contains 25 Square Feet of true HEPA material.
Metal Construction- Durable metal construction do not emit toxins like some plastics.
Optimized Air-Flow- Airflow is directed out the rear of the unit to minimize drafts and control outflow.
High-Efficiency Motor/Fans- Use less electricity and can run non-stop for years.
Compact and quiet, perfect for the home or office.
Available optional aromatherapy and Odortek packets.
5 Year Limited Warranty

Dimensions: 8-1/2" Diameter, 12-1/2" High
Weight: 6 lbs
Air Flow: 100 CFM
Power Consumption: 30 Watts
Classification: Portable HEPA 100% Sealed Air Cleaning Device; NRTL & CSA Approved
Materials: 24 Gauge Cold Rolled Steel
Finish: Powder Coated, Baked Hybrid Epoxy
Colour: Off-White
Intake (Upper Section): Perforated Steel Enclosure Surrounding A Three-Stage Filter Assembly
Outflow (Lower Section): Encloses Motor/Fan
Motor/Fan: Thermally Protected Class 'B' Insulated Motor; Designed For Continuous Operation; Run Tested For 50,000 Hours; Service 120 Volts, 60 Hertzs
Control: 2-Speed Switch
Filter Life: Pre-Filter Washable (12 Months), VOC Filter 6-12 Months, HEPA Filter 2-5 Years

Prefilter Replacement
1. Turn the unit off and unplug it.
2. Remove the used prefilter and carefully discard it in a plastic bag.
3. Line up the seam in the prefilter with the receptacle at the back of the unit. Pull the new prefilter over the unit so it snugly covers the screen.
4. Plug the unit in and turn it on.

HEPA Cartridge Replacement
1. Turn the unit off and unplug it.
2. Turn the unit upside down. With one hand holding the HEPA cartridge, pull the motor/fan housing away. Discard the cartridge in a plastic bag.
3. Sit the motor/fan housing right side up and seat the gasket in the groove.
4. Place the HEPA cartridge on the motor/fan housing and align the plugs in the cartridge with the holes in the housing. Once the holes are aligned press firmly on the top of the cartridge to secure it to the housing.
5. Plug the unit in and turn it on.