You Are Here: Home > HVAC > Heaters (Electric & Hydronic, Complete Units & Parts) > Accessories > TKIT-1
Grids Shown are 1" x 1"
Stock shown on hand can change at anytime without notice or may already be spoken for. Please enquire by phone to confirm precise amounts available at that time.
|YOUR PRICE:||$ 30.01|
|Compare at:||$ 33.01|
|Click Here for Availability|
King Electric Wall Heater & Baseboard Thermostat 1 pole Adjustable Limit stop ( No Positive Stop )
Use with King Wall heaters PAW, PZ & W Series & Baseboard heaters
45°F to 80°F (7°C - 27°C)
Maximum Amps: 25 Amps
Power Source: 125 VAC
Snap action switch with fully protected bi-metal sensor
SNAP ACTION SWITCHING: Instant, positive response. No arcing. No burning of contacts to shorten switch life. No TV snow, no radio static.
Enclosed for protection against dirt and corrosion.
BI-METAL SENSING ELEMENT: This sensitive element dependably registers the temperature change. Fully protected.
VENTED FRAME: Top and bottom to maintain normal temperature in outlet box.
AIR PASSAGE: No obstruction of air across bi-metal sensor.
FACTORY SEALED and CALIBRATED: Engineered for accurate, dependable performance. Field adjustment not required.
ENCLOSED TERMINALS: To prevent contact with grounded faces.
RATING: 22 Amps continuous at 125, 240 Volts AC. Non-inductive.
18 Amps continuous at 277 Volts AC. Non-inductive.
AVERAGE DIFFERENTIAL: Approximately 5°F at 50% of rated load.
CYCLE RATE: Approximately 2 - 4 per hour at 50% of rated load.
LIMIT STOPS (single pole only): Maximum temperature can be set by insertion of a pin.
Works with the following brands
Replaces Old Numbers: 093319110584, 093319206546, B00JAQGNS8, B018HD3JVI, FO-J2F6-4JFZ, MG-7RG5-PL2G
Add a Customer Review